Publicaciones

2019

  • Trupti Terse-Thakoor, Pankaj Ramnani, Claudia Villarreal, Dong Yan, Thien-Toan Tran, Tung Pham, Ashok Mulchandani. Graphene Nanogap Electrodes in Electrical Biosensing. Biosensors and Bioelectronics. Volume 126, 1 February 2019, Pages 838-844. https://doi.org/10.1016/j.bios.2018.11.049
  • Tung Pham, Pankaj Ramnani, Claudia C. Villarreal, Jhoann Lopez, Protik Das, lkeun Lee, Mahesh R. Neupanee, Youngwoo Rheem, Ashok Mulchandani. MoS2-graphene heterostructures as efficient organic compounds sensing 2D materials. Carbon. Volume 142, February 2019, Pages 504-512

2018

  • Alejandro Martínez-Brenes, Claudia Chaves-Villarreal. Inmovilización de la proteína fotoactiva bacteriorodopsina sobre óxido de zinc Aplicación en Celdas Solares Bio-Sensibilizadas. Tecnología en Marcha Vol. 31, Núm. 4: Octubre-Noviembre 2018 pág. 49-62
  • Claudia Chaves Villarreal, Danish Pirzada, Annie Wong, Derek Vi, Tung Pham and Ashok Mulchandani. Characterisation of the Heterojunction Microstructure for Electrodeposited Vertical ZnO Nanorods on CVD-Graphene. Materials Research Express 2018, 5:8. DOI: https://doi.org/10.1088/2053-1591/aace06
  • Ali Benvidi, Nuvia M. Saucedo, Pankaj Ramnani, Claudia Villarreal, Ashok Mulchandani, Marzieh Dehghan Tezerjani, Shahriar Jahanbani. Electro‐Oxidized Monolayer CVD Graphene Film Transducer for Ultrasensitive Impedimetric DNA Biosensor. Electroanalysis 2018, 30, 1– 11 DOI: 10.1002/elan.201700654

 

2017

  • Barillas, L., Cubero-Sesin, J.M., Vargas, V.I. (2017) Hydroxyapatite coatings on polymers using a custom Low Energy Plasma Spray (LEPS) system, sometido a publicación, IEEE Transactions on Plasma Science.
  • Barillas, L., Testrich, H., Cubero-Sesin, J.M., Quade, A., Vargas, V. I., Froehlich, M., Weltmann, K.-D., Polak, M. (2017) Bioactive and Antibacterial Plasma Sprayed Coatings on Polymer Substrates Suitable For Orthopedic and Tissue Engineering Applications, sometido a publicación, IEEE Transactions on Radiation and Plasma Medical Sciences Special Issue.
  • Barillas, L., Testrich, H., Cubero-Sesin, J.M., Quade, A., Vargas, V. I., Froehlich, M., Weltmann, K.-D., Polak, M. (2017) Plasma sprayed bioactive coatings: a study with bioabsorbable polymers”, sometido a publicación, Romanian Journal of Physics.
  • Brenes-Granados, D., Cubero-Sesin, J.M., Orozco-Gutiérrez, F. Vega-Baudrit, J.R. González-Paz, Rodolfo (2017) Variation of physical properties of rigid polyurethane foams synthesized from renewable sources with different commercial catalysts., Journal of Renewable Materials, 5(3-4), 280-289.
  • Claudia C. Villarreal, Tung Pham, Pankaj Ramnani, Ashok Mulchandani. Carbon allotropes as electrochemical sensors for environmental monitoring. Current Opinion in Electrochemistry, 2017, 3 :106–113 DOI: 10.1016/j.coelec.2017.07.004
  • Conejo-Herrera, M., Cubero-Sesin, J.M., Horita, Z., Kim, H.S. (2017) Simulación del procesamiento de una aleación de Ti-6Al-7Nb por la técnica de presión en canal angular constante usando el método de elementos finitos, Tecnología en Marcha, 30(2), 25-35. http://dx.doi.org/10.18845/tm.v30i2.3193
  • Cordero-Arias, L., & Boccaccini, A. R. (2017). Electrophoretic deposition of chondroitin sulfate-chitosan/bioactive glass composite coatings with multilayer design. Surface and Coatings Technology, 315, 417–425. http://doi.org/10.1016/j.surfcoat.2017.02.037
  • Cubero-Sesin, J.M., González-Hernández, J.E., Ulate-Kolitsky, E., Edalati, K., Horita, Z. (2017) Superplasticity of nanostructured Ti-6Al-7Nb alloy with equiaxed and lamellar initial microstructures processed by High-Pressure Torsion, IOP Conf. Ser.: Mater. Sci. Eng., 194, 012041. http://dx.doi.org/10.1088/1757-899X/194/1/012041
  • Gerardo Madrigal-Monge, Claudia Chaves-Villareal. CVD growth of ZnO nanorods in situ on graphene and the study of its application as photoanode for solar cells. Tecnología en Marcha. Número Especial Movilidad Estudiantil 2017 4. Pág 104-118. DOI: 10.18845/tm.v30i5.3221
  • González-Hernández, J.E., Cubero Sesin, J.M., Ulate-Kolitsky, E., Navarro, P., Petretti, S., Horita, Z. (2017) Nanostructuring of a titanium-aluminium-niobium alloy for biomedical applications, Journal of Renewable Materials, 5(3-4), 300-306. https://doi.org/10.7569/JRM.2017.634120
  • Karbowniczek, J., Cordero-Arias, L., Virtanen, S., Misra, S. K., Valsami-Jones, E., Rutkowski, B., … Boccaccini, A. R. (2017). Electrophoretic deposition of organic/inorganic composite coatings containing ZnO nanoparticles exhibiting antibacterial properties. Materials Science and Engineering: C, 77, 780–789. http://doi.org/10.1016/j.msec.2017.03.180
  • Radda, N. S., Goldmann, W. H., Detsch, R., Roether, J. A., Cordero-arias, L., Virtanen, S., … Boccaccini, A. R. (2017). Electrophoretic deposition of tetracycline hydrochloride loaded halloysite nanotubes chitosan / bioactive glass composite coatings for orthopedic implants. Surface & Coatings Technology, 327, 146–157. http://doi.org/10.1016/j.surfcoat.2017.07.048
  • Instituto de Normas Técnicas de Costa Rica (2017). INTE W44:2017 Cascos para Ciclistas. Requisitos y Métodos de Ensayo. San José, Costa Rica: INTECO.

2016

  • Barillas, L., Cubero-Sesin, J.M., Guillén-Girón, T. (2016) Plasma Sprayed Hydroxyapatite Coatings on 3D Printed Polymer Substrates for Orthopedic Applications: A Preliminary Study, Proceedings of the International Thermal Spray Conference, DVS-Berichte, 324, 840-845. ISBN 978-3-87155-574-9.
  • Guillen-Giron, T.; León-Salazar, J.L.; Caracterización de defectos y alteraciones nanoestructurales en la superaleación Nimonic 80A por medio de microscopía electrónica de transmission. Tecnología en Marcha 29(1):51, 2016.
  • Instituto de Normas Técnicas de Costa Rica (2016). INTE 43-01-01:2016 Cascos de seguridad para motociclistas. Requisitos. San José, Costa Rica: INTECO.
  • Instituto de Normas Técnicas de Costa Rica (2016). INTE 43-01-02:2016 Métodos de ensayo para evaluar el desempeño de los cascos de seguridad para motociclistas. San José, Costa Rica: INTECO.
  • Instituto de Normas Técnicas de Costa Rica (2016). INTE 43-01-03:2016 Cascos de protección: Hormas para ensayos. San José, Costa Rica: INTECO.

2015

  • Borjas, S., Gil, E. J., Cordero, L., Pavón, J. J., Rodriguez-Ortiz, J. A., Boccaccini, A. R., & Torres, Y. (2015). Electrophoretic Deposition and Characterization of Chitosan/45S5 Bioactive Glass Composite Coatings on Porous Titanium for Biomedical Applications. Key Engineering Materials, 654, 189–194. http://doi.org/10.4028/www.scientific.net/KEM.654.189
  • Wen-Lih Chen, Yu-Ching Yang, Jose Luis León Salazar. “A CFD parametric study on the performance of a low-temperature-differential ɣ-type Stirling engine” Energy Conversion and Management Journal, Volume 106, December 2015, pages 635-643. https://doi.org/10.1016/j.enconman.2015.10.007
  • Cordero-Arias, L., Boccaccini, A. R., & Virtanen, S. (2015). Electrochemical behavior of nanostructured TiO2/alginate composite coating on magnesium alloy AZ91D via electrophoretic deposition. Surface and Coatings Technology, 265, 212–217. http://doi.org/10.1016/j.surfcoat.2015.01.007
  • Cordero-Arias, L., Cabanas-Polo, S., Goudouri, O. M., Misra, S. K., Gilabert, J., Valsami-Jones, E., … Boccaccini, A. R. (2015). Electrophoretic deposition of ZnO/alginate and ZnO-bioactive glass/alginate composite coatings for antimicrobial applications. Materials Science and Engineering C, 55, 137–144. http://doi.org/10.1016/j.msec.2015.05.034
  • Cordero-Arias, L., Cabanas-Polo, S., Virtanen, S., & Boccaccini, A. R. (2015). Electrophoretic Deposition of Nanostructured Titania-Bioactive Glass/Alginate Coatings on Stainless Steel. Key Engineering Materials, 654, 159–164. http://doi.org/10.4028/www.scientific.net/KEM.654.159
  • Cubero-Sesin, J.M., Arita, M., Horita, Z. (2015) High Strength and Electrical Conductivity of Al-Fe alloys produced by synergistic combination of High-Pressure Torsion and Aging, Advanced Engineering Materials, 17(12), 1792-1803.
  • Cubero-Sesin, J.M., Horita, Z. (2015) Age Hardening in Ultrafine-Grained Al-2 Pct Fe Alloy Processed by High-Pressure Torsion, Metallurgical and Materials Transactions A, 46(6), 2614-2624.
  • Miola, M., Verné, E., Ciraldo, F. E., Cordero-Arias, L., & Boccaccini, A. R. (2015). Electrophoretic deposition of chitosan/45S5 bioactive glass composite coatings doped with Zn and Sr. Frontiers in Bioengineering and Biotechnology, 3(159). http://doi.org/10.3389/fbioe.2015.00159
  • Pishbin, F., Cordero-Arias, L., Cabanas-Polo, S., & Boccaccini, A. R. (2015). Bioactive polymer–calcium phosphate composite coatings by electrophoretic deposition. In C. Wen (Ed.), Surface Coating and Modification of Metallic Biomaterials (1st ed., pp. 359–377). Woodhead Publishing Limited. http://doi.org/10.1016/B978-1-78242-303-4.00012-0

2014

  • Alberto Hernández-Valle, Claudia Chaves Villarreal. Síntesis de nanoestructuras de ZnO en vidrio recubierto con In2O3/SnO2 Deposición química en fase gaseosa. Tecnología en Marcha, Edición especial Movilidad Estudiantil 2014, pag 41-51, 2014, DOI: 10.18845/tm.v27i0.2148
  • Chen, Q., de Larraya, U. P., Garmendia, N., Lasheras-Zubiate, M., Cordero-Arias, L., Virtanen, S., … Larraya, U. P. De. (2014). Electrophoretic deposition of cellulose nanocrystals (CNs) and CNs/alginate nanocomposite coatings and free standing membranes. Colloids and Surfaces B: Biointerfaces, 118, 41–48. http://doi.org/10.1016/j.colsurfb.2014.03.022 C
  • Cubero-Sesin, J.M., Arita, M., Watanabe, M., Horita, Z. (2014) High strength and high electrical conductivity of UFG Al-2%Fe alloy achieved by high-pressure torsion and aging”, IOP Conf. Ser.: Mater. Sci. Eng., 63(2014), 012117.
  • Cubero-Sesin, J.M., Arita, M., Watanabe, M., Horita, Z. (2014) Aging and Precipitation Behavior in Supersaturated Al-2%Fe Alloy Produced by High-Pressure Torsion, Materials Science Forum, 794-796, 766-771.
  • Cubero-Sesin, J.M., Hiroyuki, I., Arita, M., Iwaoka, H., Horita, Z. (2014) High-Pressure Torsion for fabrication of High-Strength and High-Electrical Conductivity Al Micro-Wires, Journal of Materials Science, 49(19), 6550-6557.
  • Edalati, K., Cubero-Sesin, J.M. Alhamidi, A. Mohamed, I.F., Horita, Z. (2014) Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of pure metals: Investigation using high-pressure torsion, Materials Science & Engineering A, 613, 103-110.
  • Edalati, K., Akama, D., Nishio, A., Lee, S., Yonenaga, Y., Cubero-Sesin, J.M., Horita, Z (2014) Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion, Acta Materialia, 69, 68-77.
  • López Calvo, V., Vicent Cabedo, M., Bannier, E., Cañas Recacha, E., Boccaccini, A. R., Cordero Arias, L., & Sánchez Vilches, E. (2014). 45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes. Journal of Materials Science, 49(23), 7933–7942. http://doi.org/10.1007/s10853-014-8519-2
  • Porwal, H., Grasso, S., Cordero-Arias, L., Li, C., Boccaccini, A. R., & Reece, M. J. (2014). Processing and bioactivity of 45S5 Bioglass®-graphene nanoplatelets composites. Journal of Materials Science: Materials in Medicine, 25(6), 1403–1413. http://doi.org/10.1007/s10856-014-5172-x
  • Raddaha, N. S., Cordero-Arias, L., Cabanas-Polo, S., Virtanen, S., Roether, J. A., & Boccaccini, A. R. (2014). Electrophoretic Deposition of Chitosan/h-BN and Chitosan/h-BN/TiO2 Composite Coatings on Stainless Steel (316L) Substrates. Materials, 7(3), 1814–1829. http://doi.org/10.3390/ma7031814
  • Jose Luis Leon Salazar, Wen-Lih Chen. “A computational fluid dynamics study on the heat transfer characteristics of the working cycle of a β-type Stirling engine”. Energy Conversion and Management Journal, Volume 88, December 2014, pages 177-188. https://doi.org/10.1016/j.enconman.2014.08.040
  • Yu-Ching Yang, Wen-Lih Chen, Huann-Ming Chou, Jose Luis Leon Salazar. “Simultaneous estimation of boundary heat flux and Convective heat transfer coefficient of a curved plate subjected to a slot liquid jet impingement cooling” An International Journal of Computation and Methodology, Volume 66, Issue 3, January 2014, pages 252-270. https://doi.org/10.1080/10407782.2013.873264

2013

  • Chen, Q., Cordero-Arias, L., Roether, J. A., Cabanas-Polo, S., Virtanen, S., & Boccaccini, A. R. (2013). Alginate/Bioglass® composite coatings on stainless steel deposited by direct current and alternating current electrophoretic deposition. Surface and Coatings Technology, 233(0), 49–56. http://doi.org/http://dx.doi.org/10.1016/j.surfcoat.2013.01.042
  • Cordero-Arias, L., Cabanas-Polo, S., Gao, H., Gilabert, J., Sanchez, E., Roether, J. A., … Boccaccini, A. R. (2013). Electrophoretic deposition of nanostructured-TiO2/chitosan composite coatings on stainless steel. RSC Advances, 3(28), 11247–11254. http://doi.org/10.1039/C3RA40535D
  • Cordero-Arias, L., Cabanas-Polo, S., Gilabert, J., Goudouri, O. M., Sanchez, E., Virtanen, S., & Boccaccini, A. R. (2013). Electrophoretic deposition of nanostructured TiO 2 /alginate and TiO 2 -bioactive glass/alginate composite coatings on stainless steel. Advances in Applied Ceramics, 113(1), 42–49. http://doi.org/10.1179/1743676113Y.0000000096
  • Cubero-Sesin, J.M., Horita, Z. (2013) Strengthening of Al through addition of Fe and by processing with High-Pressure Torsion, Journal of Materials Science, 48(13), 4713-4722.
  • Degner, J., Singer, F., Cordero, L., Boccaccini, A. R., & Virtanen, S. (2013). Electrochemical investigations of magnesium in DMEM with biodegradable polycaprolactone coating as corrosion barrier. Applied Surface Science, 282, 264–270. http://doi.org/10.1016/j.apsusc.2013.05.115
  • Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Biomechanical Evaluation of the Osseointegration of Biologically Coated Open-Cell Titanium Implants. ICF13, Beijin, China, 2013.
  • Jose Luis Leon Salazar, Wen-Lih Chen, “A computational fluid dynamics study on the heat transfer characteristics of the working cycle of a β-type Stirling engine”, CTAM 2013, The 37th National Conference on Theoretical and Applied Mechanics (37th-NCTAM) and The 1st International Conference on Mechanics (1st-ICM), Taipei, Taiwan.
  • Tozzi, G; Zhang, QH; Lupton, C; Tong, J; Guillen, T; Ohrndorf, A; Christ, H.-J.; Characterisation of a metallic foam–cement composite under selected loading conditions. Journal of Materials Science: Materials in Medicine 24 (11), 2509-2518. 2013.
  • Yu-Ching Yang, Wen-Lih Chen, Huann-Ming Chou, Jose Luis Leon Salazar. “Inverse hyperbolic thermoelastic analysis of a functionally graded hollow circular cylinder in estimating surface heat flux and thermal stresses” International Journal of Heat and Mass Transfer, Volume 60, May 2013, Pages 125-133.https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.052

2012

  • Cubero-Sesin, J.M., Horita, Z. (2012) Powder Consolidation of an Al-10 wt% Fe Alloy by High-Pressure Torsion”, Materials Science & Engineering A, 558, 462-471.
  • Cubero-Sesin, J.M., Horita, Z. (2012) Mechanical Properties and Microstructures of Al-Fe Alloys Processed by High-Pressure Torsion”, Metallurgical and Materials Transactions A, 43(13), 5182-5192.
  • Cubero-Sesin, J.M., Horita, Z. (2012) Strengthening via Microstructure Refinement in Bulk Al-4 mass% Fe Alloy Using High-Pressure Torsion, Materials Transactions, 53(1), 46-55.
  • Guillén, T.; Ohrndorf, A.; Tozzi, G.; Tong, J.; Christ, H-J.; Compressive Fatigue Behaviour of Bovine Cancellous Bone and Bone Analogous Materials under Multi-step Loading Conditions. Adv. Eng. Mat., 14 (5), B199-B207, 2012.
  • Shih-Shih Ku, King-Leung Wong & José Luis León Salazar. “The Critical Heat Transfer Characteristics of an Insulated or Compound Sphere Considering Heat Radiation”, Journal of the Chinese Institute of Engineers, Volume 35, Issue 8, 2012, pages 939-945. http://dx.doi.org/10.1080/02533839.2012.725819

2011

  • Wen-Lih Chen, Yu-Ching Yang, Haw-Long Lee, Jose Leon Salazar. “Inverse estimation for the unknown fouling geometry on the inner wall of a forced-convection pipe”. Applied Mathematics and Mechanics (English Edition). January 2011, Volume 32, Issue 1, Pages 55-68. DOI 10.1007/s10483-011-1393-9
  • Guillén, T.; Zhang, Q.H.; Tozzi, G., Ohrndorf, A.; Christ, H.J.; Tong, J., Compressive behaviour of bovine cancellous bone and bone analogous materials, microCT characterisation and FE analysis. J. Mech. Behav. Biomed. Mater. 4 (7), 1452-1461, 2011.
  • Guillén, T.; Tozzi G.; Ohrndorf, A.; Tong, J.; Christ, H-J.; Substituting cancellous bone with open-cell metal foam in biomechanical testing, MetFoam2011- Busan, Korea, September 2011.
  • Ohrndorf, A.; Guillén, T.; Zhang, Q.-H.; Tozzi, G.; Christ, H-J.; Tong, J.; Metallschäume als Ersatzwerkstoffe in der biomechanischen Prüfung von orthopädischen Implantaten. DGBM2011- Gießen, Germany, November 2011.
  • Sommer, U.; Laurich, S.; Alt, V.; Hagemann, K.; Bührig-Polaczek, A.; Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Ploska, U.; Becker, A.; Berger, G.; Altindis, M.; Krupp, U.; Wenisch, S.; Schnettler R.; Experimentelle Untersuchungen einer gegossenen, offenporigen Titanstruktur mit biologischer Reaktionsschicht im Rattenmodell. DGBM2011- Gießen, Germany, November 2011.
  • Sommer, U.; Hagemann, K.; Bührig-Polaczek, A.; Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Ploska, U.; Becker, A.; Berger, G.; Altindis, M.; Krupp, U.; Wenisch, S.; Schnettler R.; Experimentelle Untersuchungen einer gegossenen Titanstruktur mit biologischer Reaktionsschicht in vitro, (Poster presentation) in DGBM2011- Gießen, Germany, November 2011.
  • King-Leung Wong, Jose Luis Leon Salazar, Leo Prasad and Wen-Lih Chen, "The inaccuracy of heat transfer characteristics for non-insulated and insulated spherical containers neglecting the influence of heat radiation". Energy Conversion and Management, International Journal. Volume 52, Issue 3, March 2011, Pages 1612-1621. https://doi.org/10.1016/j.enconman.2010.10.016
  • Yu-Ching Yang, Haw-Long Lee, Wen-Lih Chen, Jose Leon Salazar. “Estimation of thermal contact resistance and temperature distributions in the pad/disc tribosystem” International Communications in Heat and Mass Transfer, Volume 38, Issue 3, March 2011, Pages 298-303. https://doi.org/10.1016/j.icheatmasstransfer.2010.11.005
  • Zhang, Q.-H.; Tozzi, G.; Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Post yield behaviour of bovine trabecular bone and bone analogous materials under compression, ISB2011 – Brussels, Belgium, July 2011.

2010

  • Wen-Lih Chen, Yu-Ching Yang, Jose Leon Salazar., “Calculation of Jet’s Inlet Temperature for Plate Temperature Control in an Impinging Jet Cooling Problem”. International Journal of Heat and Mass Transfer, Volume 53, Issues 21-22, October 2010, Pages 5008-5016. https://doi.org/10.1016/j.ijheatmasstransfer.2010.05.021
  • Guillén, T.; Altindis, M.; Ohrndorf, A.; Christ, H-J.; Krupp, U.; Fracture Behaviour of Promising Biomedical Open-Cell Ti-6Al-7Nb Sponge with Bioactive Calcium Titanate Layer under Monotonic and Cyclic Loading Conditions. Proc. In: 18th European Conference on Fracture ECF 18. Fracture of materials and structures from micro to macro scale, Dresden, Germany, 30th August- 3rd September, 2010.
  • Tozzi, G.; Tong, J.; Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Characterisation of aluminium foam as a cancellous bone substitute, ESB2010 – Edinburgh, UK, July 2010.
  • 2009
  • Guillén, T.; Ohrndorf, A.; Christ, H-J.; Hagemann, K.; Buehrig-Polaczek, A.; Krupp, U., Removal of the α-case layer from precision-cast cellular Ti-6Al-7Nb to be used for biomedical applications, Adv. Eng. Mat., 11 (8), 660-684, 2009.
  • Krupp, U.; Altindis, M.; Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Hagemann, K.; Buehrig-Polaczek, A.; Ploska, U.; Berger, G.; Sommer, U.; Wenisch, S.; Schnettler, R.; Development and Characterization of Open-Cell Ti-6Al-7Nb Structures to be Used as Biomedical Implants, accepted in Proc. Met-foam 2009, Bratislava, Slovakia, 2009.
  • Ohrndorf, A.; Guillén, T.; Christ, H-J. et al.: Bone replacement by open-cell titanium sponge with bioactive reaction layer, accepted in Proc. Euromat 2009, Glasgow, UK
  • 2008
  • Guillén, T.; Ohrndorf, A.; Christ, H.-J.; Krupp, U., Characterization of open-cell metallic implant structures with biological reaction layer. (Poster), Junior Euromat 2008, Lausanne , Schweiz.
  • Krupp, U.; Ohrndorf, A.; Guillén, T.; Hipke, T.; Hohlfeld, J.; Aeggerter, J.; Danninger, A.; Degischer, H.-P.; Reinfried, M.: „Standardisierung der mechanischen Werkstoffprüfung für zellulare metallische Werkstoffe“, in: Proc. Werkstoffprüfung 2008, 4th und 5th December, pp. 309-316, Berlin.
  • Jose Luis Leon Salazar, King-Leung Wong, “The Critical Heat Transfer Characteristics of an Insulated Circular Duct Considering Heat Radiation”, Annual Conference of Combustion Institute of Republic of China (CIROC) and 20th National Conference on Combustion and Energy, 20 de Marzo 2010, Tainan, Taiwan.
  • King Leung Wong, Jose Luis Leon Salazar, Wen-Lih Chen, “The Critical Heat Transfer Characteristics of an Insulated Circular Duct Considering Heat Radiation”, 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19 - 21 July 2010, Antalya, Turkey Paper no. K02-03

2009

  • Jose Luis Leon Salazar, King-Leung Wong, “The Critical Heat Transfer Characteristics of an Insulated Sphere Considering Heat Radiation”, ISCM II & EPMESC XII, November 30- December 3, Hong Kong and Macau, 2009. https://doi.org/10.1063/1.3452096
  • King-Leung Wong, José Luis León Salazar, Fu-Jen Wang, The inaccuracy of heat transfer characteristics for an insulated and non-insulated sphere neglecting the influence of heat radiation, 10th Asia Pacific Conference on the Built Environment, Green Energy for Environment, November 5-6 (Thu.-Fri.), 2009 Kaohsiung, Taiwan
  • Patentes
  • Taiwan Patent M 360938, “Stirling Engine Power System”, 11/07/2009
  • Taiwan Patent M 361043, “Active Solar Tracking System by Shadow location Technique”, 11/07/2009.

2007

  • Krupp, U.; Ohrndorf, A.; Guillén, T.; Hipke, T.; Hohlfeld, J.; Danninger, A.; Reinfried, M.; Aegerter, J.; Development of a standard for compression testing of cellular metals. In: METFOAM 2007, Montreal, Canada, pp. 407-410, 2007.

2006

  • Guha, S., Agraharam, S., Cubero-Sesin, J.M., Chan Arguedas, S., Kwok, K., Mendenhall, M., Viju Menon (2006) Fab-ATM Process Interactions Affecting Assembly Yield, Intel Assembly & Test Technology Journal, 9, pp. 215-221
  • Guillén, T.; Krupp, U.; Ohrndorf, A.; Christ, H.-J.; Demiray, S.; Hohe, J.; Becker, W.; Thermomechanical Fatigue of Open-Cell Aluminum Sponge, Proc. 16th European Conference on Fracture ECF 16, Failure and analysis of nano and engineering materials and structures, Alexandroupolis, Greece, 3-7 July 2006.
  • Krupp, U.; Ohrndorf, A.; Guillén, T.; Christ, H.-J.; Demiray, S.; Becker, W.; Hohe, J., Isothermal and thermomechanical fatigue behavior of open-cell metal sponges - experimental analysis and homogenization modeling, Adv. Eng. Mat., 8 (11), 821-827, 2006.

2005

  • Guillén, T.; Ohrndorf, A.; Krupp, U.; Christ, H.-J.; Study of the mechanical behaviour of the open-cell AlSi7Mg sponge under monotonic and cycling loading conditions, ALFA project, AMEPAR program, Margarita Island, Venezuela, 2005.
  • Krupp, U.; Ohrndorf, A.; Guillén, T.; Christ, H.-J.; Demiray, S.; Hohe, J.; Becker W.; Isothermal and Thermomechanical Fatigue of Open-Cell Metal Sponges, in: Porous Metals and Metal Foaming Technology, Proc. METFOAM 2005, Kyoto, Japan, pp. 559-564, 21-23 September 2005.

No se encontraron resultados